polarsign

Sep 22, 2010 And im having a problem with my dvd drive it wont read. This is a discussion on TSSTcorp CD/DVDW TS-H652 drive within the Other. Chipset drivers? Jan 20, 2012 My dvd quit.device mngr shows. TSSTcorp scsi dvd driver. Some DVD drives do not use the Windows default drivers so check with the System maker and.

New Boyz Too Cool To Care Mp3 there. Tips for better search results • Ensure correct spelling and spacing - Examples: 'paper jam' • Use product model name: - Examples: laserjet pro p1102, DeskJet 2130 • For HP products, enter a serial number or product number. - Examples: HU265BM18V, LG534UA • For Samsung Print products, enter the M/C or Model Code found on the product label. - Examples: “SL-M2020W/XAA” • Include keywords along with product name. Examples: 'LaserJet Pro P1102 paper jam', 'EliteBook 840 G3 bios update' Need help finding your product name, number or serial number? Using the cable that ships with the HP DVD/CD drive is recommended because is designed to host two devices on one IDE channel.

When using this cable, it is necessary to set the Master/Slave configuration by using what are called “jumper pins.” Looking at the back of the HP drive (Figure 1), the jumper pins are located on the left of the IDE cable connector for the drive. On the HP DVD/CD Writer drives, from left to right, the pin configuration is Cable Select (CS), Slave (SL), and Master (MA). The small plastic plug is placed on the vertical pairs of pins from left to right to make the desired selection. If the model of your HP DVD/CD Writer drive did not come with a cable, or if for some reason you must use the cable that already exists in your system, it may be necessary to adjust the jumper settings on the back of the HP drive so that it may be used on this cable.

Verify the jumper settings on the other IDE device on the secondary controller. If the existing IDE device on the secondary controller is jumpered to Cable Select, the HP DVD/CD Writer drive will also need to be jumpered to Cable Select (Figure 1). As long as both devices are jumpered to Cable Select, the devices should work properly, but again, it is better to use a standard IDE cable, like the one that ships with most of the HP drives to avoid potential issues.